Hop Shing Engineering & Construction Limited is an highly acclaimed product applicator and has outstanding expertise in the application and design requirements for the following types of products - used in both new construction and maintenance works.

Hop Shing also acts as a problem solver to assist specifiers and site staff with product technology selection - thereby based on working experience can assist to ensure that the best truly on site workable solution can be adopted - for more information on this free service please see our "Specifying Team" section.

Areas of product expertise include:-

1) Floor Coatings

Skilled in the application of the full range of floor coating and screeding options, including:-

• Anti-skid Floor Coatings - aggregate bound floors for wet areas or slope and carpark applications.
• Anti-static Floor Coatings - performance floors for electronic and computer facility applications.
• Concrete Floor Hardeners - power-floated (hardeners either mixed into floor base or surface applied)
• Concrete Self leveling Floor Screeds (range of thicknesses)
• Dust Proof Layers - application of polyurethanes, expoxies, cementitious and MMA options
• Decorative Floor Coatings - application of polyurethanes, expoxies, cementitious and MMA options
• Protective Floor Coatings - application of polyurethanes, expoxies, cementitious and MMA options.
  

2) Roading & Carpark Materials

Skilled in the application of road and carpark anti-skid materials, hard wearing screeds, asphalt reinstatement materials and line markings, including:-

• Anti-skid Traffic Layers - cementitious, epoxy & asphalt based solutions.
• Coloured Traffic Layers - cementitious& epoxy based solutions.
• Hard Wearing Traffic Layers - cementitious& epoxy based solutions.
• Asphalt Rejuvenation Compounds - tar oil based solutions.
• Asphalt Sealers - acrylic, rubber & cementitious based.
• Concrete Repair Materials - please see the concrete repair section below.
• Line / Road Marking - cold applied (cementitious, acrylic & epoxy) & hot applied (thermoplastics).
  

3) Decorative and Protective Surface Coatings

Skilled in the application of the full range of decorative and protective surface coatings (both site mixed and pre-bagged) for external and internal applications (e.g. buildings, bridges, flyovers, tunnels, hygiene rooms, water tanks etc.), including:-

• Anti-carbonation / Chloride Resistant Coatings - acrylic, xylene, zinc, epoxy & cementitious options.
• Anti-fungi Coatings - Epoxy & MMA options
• Anti-grafetti Coatings - xylene based option.
• Anti-static Coatings - epoxy based option.
• Chemical Resistant Coatings - epoxy, MMA & cementitious based solutions.
• Potable & Dirty Water Coatings - epoxy based solutions
  

4) Grouts and Anchors

Skilled in the application of the full range of above and below water grouts, including:-

• Anchoring Grouts - epoxy based solutions.
• Dynamic Load Grouts - epoxy based solutions.
• Machine Baseplate Grouts - cementitious& epoxy based options.
• Underwater Application Grouts - cementitious & epoxy options.
  

5) Joint Sealants and Sealant Backing Materials

Skilled in the application of joint backing materials and sealants, including:-

• Expansion Joint Backing materials - closed cell polyethylene sheet and rod joint fillers
• Compressible Backing Materials - bitumen impregnated fibreboard and polyethylene sheets & rods.
• Water Resistant Backing Materials - laminated polyethylene sheet & cork based options.
• Fire Resistant / Intrumescent - polyurethane, polysulphide & preformed solutions
• Floor & Horizontal Joint Sealants - polyurethane & polysulphide solutions.
• Vertical Joint Sealants - rubber, silicone, polyurethane & polysulphide solutions.
• Mechanical Joint Solutions - in-situ metal based expansion & contraction joint solutions
  

6) Waterproofing Materials

Skilled in the application of the full range of waterproofing and damp proofing solutions, including:-

• Crystallization Waterproofing - spray applied coatings that crystallize to waterproof.
• Liquid Membranes - cementitious and bitumen based solutions
• Sheet Membranes - cold applied (clay / bentonite & bitumen based) & hot applied bitumen based.
  

7) Concrete Repair Materials

Skilled in the application of the full range of concrete repair mortars, grouts & screeds (both site mixed and pre-bagged) and injection grouts for hairline cracks, small edge repairs and large area concrete reinstatement (e.g. concrete roads), including:-

• Concrete Mortars - used in the repair of light-weight, medium-weight and structural concrete repairs.
• Concrete Screeds - used in the repair of light-weight, medium-weight and structural concrete repairs.
• Injection Grouts - epoxy based solutions.
• Epoxy Repair Mortars - used in the repair of medium-weight and structural concrete repairs.
• Epoxy Screeds - used in the repair of horizontal medium-weight and structural concrete repairs
• Large Repairs - including additive solutions for premixed concrete.
• Underwater Repairs - epoxy and cementitious based solutions.
  

Please feel free to ask us more about our product based experience and applications that we have been involved in and how we can assist you with these.